Milestone XProtect Professional 2014 Manuel d'utilisateur télécharger pdf (Page 199)

Milestone XProtect

Professional

2014

Administrator's Manual

www.milestonesys.com

199

System maintenance

new system does not use the exact same physical cameras as the cloned system. When you use the

cloned configuration later in a new system, the GUIDs are replaced with GUIDs representing the

specific components of the new system.

After you have marked GUIDs for replacement, the configuration files are combined into one single

.xml file, which you can then save at a location specified by you. Note that if there are unsaved

changes to your configuration, they are automatically saved when you export the configuration.

1. In the Management Application's File menu, select Export Configuration - Clone.

2. Browse to the location at which you want to store the exported configuration, specify a suitable

file name, and click Save.

Import previously exported Management Application configuration

The same import method is used regardless of whether the Management Application configuration

was exported as a backup or a clone.

1. In the Management Application's File menu, select Import Configuration.

2. Browse to the location from which you want to import the configuration, select the relevant

configuration file, and click Open.

3. Only relevant if the system into which you import the configuration contains devices (cameras,

etc.) which are not present in the imported configuration: you are asked whether you want to

delete or keep recordings from affected devices. If you want to keep the recordings, note that

they are not accessible until you add the affected devices to the system again. Select the

option you need, and click OK.

4. Expand Advanced Configuration, and select Services.

5. For the Recording Server and Image Server services respectively, click the Restart button.

Restarting the two services applies the imported Management Application configuration.

Import changes to configuration

You can import changes to a configuration. This can be relevant if you install many similar systems, for

example in a chain of shops where the same types of server, hardware devices, and cameras are

used in each shop. In such cases, you can use an existing configuration as a template for the other

installations. However, since the shops' installations are not exactly the same (the hardware devices

and cameras are of the same type, but they are not physically the same, and therefore they have

different MAC addresses), there needs to be an easy way of importing changes to the template

configuration.

This is why you can import changes about hardware devices and cameras as comma-separated

values (CSV) from a file:

1. From the menu bar, select File > Import Changes to Configuration...

2. Select Online verification if the new hardware devices and cameras listed in your CSV file

are connected to the server and you want to verify that they can be reached.

3. Point to the CSV file, and click the Import Configuration from File button.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 217 218

Commentaires sur ces manuels

Pas de commentaire

Milestone XProtect Professional 2014 Manuel d'utilisateur Page 199

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Milestone XProtect Professional 2014