Milestone XProtect Professional 2014 Manuel d'utilisateur télécharger pdf (Page 33)

Milestone XProtect

Professional

2014

Administrator's Manual

www.milestonesys.com

First time use

Get your system up and running

This checklist outlines the tasks typically involved when you set up a working system.

Note that although the information is presented as a checklist, a completed checklist does not in itself

guarantee that the system matches your exact needs. To make the system match the needs of your

organization, Milestone highly recommends that you monitor and adjust the system once it is running.

For example, it is often a good idea to spend time on testing and adjusting the motion detection

sensitivity settings for individual cameras under different physical conditions (such as day or night,

windy or calm wather). Do this once the system is running. The setup of events and associated actions

typically also depends on your organization's needs.

You can print and use this checklist as you go along.

Install your system

See Install surveillance server software (see "Install your system software" on page 27). If

you are upgrading an existing version of your system, see Upgrade from a previous version

(see "Upgrading from one product version to another product version" on page 30).

You may not need to go through this step as your vendor often takes care of the process for

you. You must first register your software and next activate your licenses.

Open the Management Application

Open the Management Application after installation to begin setting up your system

features.

Verify initial configuration of cameras and other hardware devices

When you open your system for the first time, the Getting Started wizard assists you with a

quick way to add hardware devices (cameras, video encoders and more) to your system

and configure them with proper user names and passwords. See Getting started wizard

(see "Automatic configuration wizard" on page 39).

Configure cameras

You can specify a wide variety of settings for each camera connected to your system.

Settings include video format, resolution, motion detection sensitivity, where to store and

archive recordings, any pan-tilt-zoom (PTZ) preset positions, association with microphones,

speakers and more. See About video and recording configuration (on page 64).

Configure events, input and output

If required, use system events, for example based on input from sensors, to automatically

trigger actions in your system.

Examples of actions: starting or stopping recording on cameras, switching to a particular

video frame rate, making PTZ cameras move to specific preset positions. Also use events to

activate hardware output, such as lights or sirens. See Overview of events.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 217 218

Pas de commentaire

Milestone XProtect Professional 2014 Manuel d'utilisateur Page 33